glass lamination machine

9350 Multifunctional intelligent automatic laminating machine
lntelligent error correction, one key quick control,cold mounting / hot mounting, nine speed shifting, single / double side lamination

Product Parameter:

Model: 9350 Fixed speed
Power supply: 220v/50hz
Total power : 500w
temperature： 0-180 degree C---Preheating is only 3 minutes

Film covering width: A3+/33.5cm --Length customization
Paperboard thickness: 0.1--5mm ---With stepless clutch
Film mulching speed: 1.1m/minute--

Main engine weight : 5.9kg
Including package <7kg

Machine size: Length 52.8cm width 23cm height 30.8cm (Fully extended on)
Transport dimensions: Length 63cm width 30cm height 27cm

The upper membrane frame is raised, and it iscompatible with the three inch core positioner,
which is compatible with the 3-inch paper core and the film with an outer diameter of 21 cm

Safer integrated flip feed tray
Advantages: the integrated paper feeder is always with the main machine,and the secondary transportation is not lost. When installing or changingconsumables, the paper feeding table can slide and turn over along thetrack. lf it is not offline, it will not fall down and hurt feet.。

Small automatic laminating machine can protect printing charts, contracts and important documents, improve the grade, waterproof, mildew proof, anti oxidation, tamper proof and scrubbable.lt is a common tool for office printing, advertising graphics and photo studio.With the progress oftechnology, the function of small film machine is constantly improved, and it has been case film, paper art To increase revenue.

Hot mounting / cold mounting - single / double side:

Cold mounting and hot mounting are based on the different classification of laminating consuma-bles, both belong to "laminating ". Therefore, the so-called laminating includes hot laminating an-d cold laminating .Our small film machine not only supports hot mounting consumables BOPP and pet hot melt adhesive pre coating, but also supports a wide range of cold mounting film,self-adhesive and self mounting materials. Small film machine in addition to one side of the film, butalso can be hot mounting on both sides at the same time. Users should flexibly apply the two kinds of consumables according to the requirements of customers and the compatible characteristics of products. If part of the printing substrate does not support high temperature, you can use cold mounting film to complete the lamination operation.

For hard film:

Ordinary hard film is not a strong point of laminating machine. Laminating machine is an internalheat principle, and the rear corner of ordinary hard film may be easily warped, deformed and soft-ened. lf you mainly use ordinary hard film, it is recommended to purchase ordinary hard film machine separately.

How to choose hot mounting film?

1)The film should be purchased with a flat appearance. lf
there are obvious wrinkles, uneven film, the film is easy towrinkle and bubble, affecting the quality of hot mounting.

2)One side hot mounting, should purchase PET film, itsdensity is big, after covering film shrinkage is small, smoo-ther, does not roll.

3)The paper width is better than the width of the film, sothere is no excess film edge, improve the quality.

Film width > paper width, harmful

1)Many sellers are not technical personnel, blindly enlarge the buyer's psychology, do too wide film, bring troubleto users.
2)The surplus film edge shrinks and affects the flatness.3)Film edge hot melt glue contaminated Cots.
4)Too much film edge, sticking cots, causing winch failure.5)Waste resources and money.

What size of laminating machine should you buy?

The size algorithm of the laminating machine is consistent with that of the printer,andis based on the paper feed width.
For example,the feed width of A4 printer ls 21 cm,
then A4 laminating machine feed width is also 21 cm.
And A4 + will only be 2-3cm largerthan this width,
No lt will be as big as 29.7 cm long.
lf the width of the input paper reach-es more than 30 cm, it is the A3 laminating machine.Therefore:
lf the printer is A4 (2icm)，A3(30cm) feed paper,you can buy 9350，9350T machine,inorder to expand lf the budget is sufficient,

you can also buy 9460 and 9460T machines.lf your printer is A2 (42cm) paper feed,then you have to buy 9460，9460T laminating machine，
because the other Compared with your printer，the format of the two typesof laminating machines is too small to match.ln short,to buy a laminating machine,you'd rather choose a larger model than a smaller printer.

Universal Automatic Glass Screen Protector Film laminator Tempered Glass Steel Film Laminating Machine for Phone Repair Shop

Features

Precise positioning system
The dual-axis dual-track design makes the protective film simple, fast and accurate in the center of the screen to prevent sticking, even a novice without any experience can be completed in only a few tens of seconds!


Pneumatic dust removal system
The high-speed airflow is used to blow away dust that has fallen on the screen simply, quickly and efficiently, without the need to stick away with a tape or to take it away with an electrostatic paper.

Night vision lighting system
The high-brightness and low-power LED lamp design , no need for additional lighting equipment such as table lamps, which saves space and clears the dust on the screen more clearly, thus avoiding the generation of air bubbles.

Shear membrane system
Quickly trim the mesh film, universal film, and lattice film with each side
Very straight, no burrs, no white edges, no curling.


Rapid fixing system
The automatic negative pressure adsorption fixed design can be automatically adsorbed and fixed by simply placing the mobile phone on the suction cup. The double anti-skid design prevents the mobile phone from being persuaded and improves the positioning accuracy.

Operation Steps

Step 1: Switch on the left button and the blue light lights, put the phone on the big suction cup, fixed the phone by simply pressing, positioning the corresponding screen film on the mobile phone.

Step 2: Press the film to prevent moving, press down the film lifter and make sure the suction cup absorbs the film firmly, then release all the fingers and lift the lifter.

Step 3: Tear off the film "1" on the film lifter.

Step 4: Quickly and gently press down the film lifter to make the film stick on the phone screen.

Step 5: Switch off the phone fixed button, press the metal ball for pressure relief, and press the film lifter by thumbs then push out the phone by index fingers. Squeezing out the bubbles if there is any, and tear off the film "2", DONE!