flash trigger battery


Godox Xpro-C Xpro-N Xpro-S Xpro-F Xpro-O Xpro-P TTL 1/8000s HSS Wireless Flash Trigger for Canon Nikon Sony Fuji Olympus Pentax

Godox Xpro-C Xpro-N Xpro-S Xpro-F Xpro-O Xpro-P TTL 1/8000s HSS Wireless Flash Trigger for Canon Nikon Sony Fuji Olympus Pentax

Product description
Model:Xpro-C/N/S/F/O/P
 
Compatible cameras:for Canon,Nikon,Sony,Fuji,Olympus,Pentax DSLR Camera(TTL autoflash)Support for the cameras that have PC sync socket.
Flash Exposure Control
TTL autoflash:TTL 
Manual flash:Yes
Stroboscopic flash:Yes
Function
High-speed sync:Yes
Second-curtain sync:Yes
Flash exposure lock:Yes
Focus assist:Yes
Modeling lamp:Control the modeling lamp by the flash trigger
Beeper:Control the beeper by the flash trigger
Wireless setting:The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function:Transform the TTL shooting value into the output value in the M node
Firmware upgrade:Upgrade through the Type-C USB port
Memory function:Settings will be stored 2 seconds after lasht operation and recover after a restart
Wireless Flash
Transmission range(approx.£©£º0-100m
Built-in wireless:2.4G
Modulation mode:MSK
Channel:32
Wireless ID:01-99
Group:16
 
Other
Display:Large LCD panel,backlighting ON of OFF
Dimension/Weight:90x58x50mm/80g
 
PACKAGE CONTENTS
1* Godox Xpro-C/N/S/F/O/P Trigger
1* Product Manual
1* Gift
 
 



Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + Receiver Set for Canon Nikon Olympus Pentax Studio Flash

Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + Receiver Set for Canon Nikon Olympus Pentax Studio Flash

Godox CT-16 Radio Flash Trigger Transmitter + Receiver

Introduction:
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.
The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signal. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.
Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/250sec.
All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.

Features
- Universal hot shoe interface
- 433MHz transmit frequency secures fast response and stable transmission
- 16 channels, transmitting distance up to 30m, no limits with directions or angles
- Maximum synchronous speed up to 1/250 second
- With studio flash interface, can wirelessly trigger several kinds of studio flashes
- Speedy frequency regulation, convenient for photographers to shoot
- Energy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver
- Comes with a PC sync cord for cameras without hot shoe connections
Note: This trigger does not support TTL function.

Compatible with:
For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
For Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
For Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
For Olympus FL-50, FL36;
For Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
For Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
Other flash models with a trigger voltage of 12V or lower;
Work with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for SONY as they use a special hot shoe)


Specification

Model: CT-16
Channel: 16 Channels
Transmit Frequency: 433MHz
Transmitter Power: 12V 23A lithium battery (Not included)
Receiver Power: 2 x 1.5V AAA Battery (Not included)
Outdoor operation distance: max. 30m / 90feet (open area, no fraise)
Indoor operation distance: max. 25m / 75feet
Synchronous speed: Max. 1/250sec
Transmitter Dimension: 60x42x30mm
Receiver Dimension: 90x50x32mm
Color: Black
Material: Metal + Plastic

Operation
How to use:
Insert the transmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both transmitter and receiver at same channel. Press the Test button on the transmitter to test before shooting.
If your camera does not have hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (Only the old camera needed).
You can trigger both the flashgun and studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC slave flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included).

Package Listing kit 1

1 xCT-16 Transmitter
1xCT-16 Receiver
1xSync Cable
1xConvert Adapter
1x User Manual
Note: Don't include other products

Package Listing kit 2

1 xCT-16 Transmitter
2xCT-16 Receiver
2xSync Cable
2xConvert Adapter
1x User Manual
Note: Don't include other products

Package Listing kit 3

1 xCT-16 Transmitter
3xCT-16 Receiver
3xSync Cable
3xConvert Adapter
1x User Manual
Note: Don't include other products

Package Listing kit 4

1 xCT-16 Transmitter
4xCT-16 Receiver
4xSync Cable
4xConvert Adapter
1x User Manual
Note: Don't include other products


Supfire strong light torch C8 brightness flashlight 18650 battery waterproof usb rechargeable tactical torch flash light

Supfire strong light torch C8 brightness flashlight 18650 battery waterproof usb rechargeable tactical torch flash light

Product Paramenters
Supfire strong light torch high brightness flashlight 18650 battery waterproof usb rechargeable tactical torch flash light
Light Source
JINGNENG XL2
Theoretical Brightness
800 lumen
Power
8w
Material
aluminum alloy
Size
155*45*23 mm
Weight
180g
Runtime
2-5h
Distance
100-200m
Modes
5modes (High>Middle>Low>Strobe>SOS)
Packing
Full set: flashlight +1* 18650 battery+charger+green rope+black box
Details Images
Our Advantage
Q1: .Are you a manufacturer or trading company?
A: We are a professional manufacturer of led flashlight, led headlamp, and other lighting product.

Q2: How do you control the products quality?
A: We check the products one by one before do the bulk packing.https://supfiretorch.en.alibaba.com/

Q3: What types of packaging do you usually use for this product?
A:Normally we offer White Box packing.

Q4: How long does it take to manufacture once an order has been placed?
A:It depends on the volume of the order.Most Online wholesales orders we ship within 7 days after we receive payment.

Q5:What methods of payment do you accept for the full-order?
A:Various payment methods are available, including via PayPal, Visa,MasterCard, Alibaba Trade Assurance,Western Union and T/T.

Q6: Is it possible to put our logo on your product or product packaging?
A:Of course, we have a factory, welcome to customize such as your brand,LOGO,Color, Product Manual,packaging etc....

Q7: How do you to handle the issue if the products have some problem after received?
A: We will compensate the customers for loss by products or discount if the problem caused by the product.

Q8:How Can I order?
A:Has items in stock, click "Start Order" and pay directly!
(Input quantity, choose your country, then you can see total price)
Please do write your Name, Address, Zip code and Phone number for delivery!


JJC Optical Flash Slave Trigger Wireless ISO 518 Hot Shoe Sync Speedlight Adapter with PC Socket 1/4 Thread for Canon Nikon Sony

JJC Optical Flash Slave Trigger Wireless ISO 518 Hot Shoe Sync Speedlight Adapter with PC Socket 1/4 Thread for Canon Nikon Sony


Product Features

1. The flash standard hot shoe on the top is perfectly fit for off-camera flash, microphone, studio light

2. Optical Flash Slave trigger for lag-free firing of a second flash unit. For shoe-mount flash units - no cord required. Range: 20m (66ft)

3. The PC female outlet on the side, enabling you to trigger flash mounted onto the upper hot shoe and additional flash or studio light (A sync cable is excluded)

4. The standard cold shoe on the bottom is compatible with DSLR, mirrorless digital camera, camcorder and other cameras with standard hot shoe

5. The 1/4"-20 Tripod Socket can be mounted onto a tripod with a 1/4"-20 male screw. And the lock nut helps you mount the devices tightly

6. Wireless and no battery needed


Compatibility

JSYK-3B hot shoe sync adapter is fit for all flashes with standard ISO 518 hot shoe excepts Canon.

JSYK-3A hot shoe sync adapter is fit for Canon flash except 540EZ

JSYK-6 hot shoe sync adapter is fit for Sony/Maxxum flash

*This hot shoe mount adapter does not support TTL flash operation


Specification

Model: JJC JSYK Series

Material: ABS Plastic + Metal

Color: Black

Weight: 0.03kg/0.07 lb

Packaging Type: Paperboard + plastic

Range: 20m (66 ft)





Camera Flashes Accessories 3.5mm to Male PC Flash Sync Cable Screw Lock for Trigger Studio Light

Camera Flashes Accessories 3.5mm to Male PC Flash Sync Cable Screw Lock for Trigger Studio Light

 

Description:

Product Name : PC Flash Sync Cable

Connector Type : 3.5mm 1/8"Plug to PC Sync Male

Total Length(Not Stretched) : 32cm / 12.6"

External Material : Plastic, Metal

Weight : 18g

Main Color : Black


Package Content :

     1 x PC Flash Sync Cable

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

 

Godox Xpro Series Flash Trigger Transmitter Xpro-C/N/S/F/O for all Type Camera for Canon Nikon Sony Olympus Panasonic Fuji

Godox Xpro Series Flash Trigger Transmitter Xpro-C/N/S/F/O for all Type Camera for Canon Nikon Sony Olympus Panasonic Fuji

Xpro-C TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes, but also can control the Cannon original flashes when using in combination with X1R-C receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Canon EOS series cameras.

Built-in Godox 2.4G Wirless X System & Versatile Using Methods

- Can as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack

Support E-TTL II Autoflash and Professional Functions

-16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

-Fully support TTL autoflash. 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shcx)t setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.

Outstanding Design, Easy Operation and Great Portability

- Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.

- Xpro-C is quite portable for it only weighs 80g

-Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.

Godox Xpro all series Trigger:

Xpro-C:

1Dx MarkII, 1Dx, 5Ds/5Dsr, 5DIV, 5D MarkIII, 5D MarkII, 7D MarkII, 7D, 6D, 80D, 70D, 60D, 50D, 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, 450D, 400D Digital, 350D DIGITAL, 100D, 1200D, 1000D, 1100D, M5, M3

Xpro-N:

D5, D4, D60, D70S, D90, D100, D200, D300S, D300, D500, D610, D700, D750, D800, D810, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D7000, D7100

Xpro-S:

a77lI, a7III, a99, ILCE-6000L, a9, A7C, A7R, A7Rlll, a350, DSC-RX10

Xpro-F: (Different models support different functions.)

1. Fujifilm GFX50S, X-Pro2, X-T20, X-T2,X-T1

2. Fujifilm X-Pro1, X-T10, X-E1,X-A3

3. Fujifilm X100F,X100T

Xpro-O:

PEN-F, E-P3, E-P5, E-PL5, E-PL6, E-PL7, E-PL8, E-M1, E-M10II.

DMC-G85, DMC-GH4, DMC-GF1, DMC-GX85, DMC-LX100, DMC-FX2500GK

Xpro-P:

K-1, 645Z, K70, K50, KP, K-S2, K-3II

Model:Xpro-C
Compatible cameras: Canon EOS cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket.
Power supply: 2*AA batteries
Flash Exposure Control: E-TTL II
Manual flash: Yes
Stroboscopic flash:Yes
High-speed sync:Yes
Second-curtain sync :Yes
Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modeling lamp: Control the modeling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera
ZOOM setting: Adjust the ZOOM value by the transmitter
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last
Transmission range (approx.): 0-100m
Built-in wireless:2.4G
Modulation mode:MSK
Channel:32
Wireless ID: 01-99
Group:16
Display:Large LCD panel, backlighting ON or OFF
Dimension:90x58x50mm
Weight:80g

Package Includes:

1x XPro Wireless Flash Trigger
1x Manual
1x Original packing
1x Gift kit



Doublepow 12V rolling doorbell anti-theft flash trigger battery 27a12v garage remote control mercury-free environmental prote

Doublepow 12V rolling doorbell anti-theft flash trigger battery 27a12v garage remote control mercury-free environmental prote


27A 12V battery*5


Size:28*8mm




















Andoer PT-04GY 4 Channels Wireless Remote Speedlite Flash Trigger 1 Transmitter and 2 Receivers for Canon Nikon Pentax Olympus

Andoer PT-04GY 4 Channels Wireless Remote Speedlite Flash Trigger 1 Transmitter and 2 Receivers for Canon Nikon Pentax Olympus

Andoer PT-04GY 4 Channels Wireless Remote Speedlite Flash Trigger 1 Transmitter and 2 Receivers for Canon Nikon Pentax Olympus

Features:
This set consists of a signal sender and two receiver trigger.
Universal hot shoe interface, compatible for Canon, Nikon, Sigma, Olympus, Pentax, etc. (except Minolta SONY, for they use a special hot shoe).
Globally univeral 433Mhz frequency, 4 channels.
With studio flash interface, can trigger several kinds of studio flashes.
Transmitting distance up to 30M, no limits with directions or angles.
1/4" nut can be connected with tripod or light holder to make flashlight safe and stable.
Energy-saving design with 12V 23A battery of transmitter and 2 * AAA batteries(not included) of receiver.
Comes with a PC sync cord for cameras without hot shoe socket.


Note: This trigger do not support TTL function.

Specifications:
Power of transmitter: 23A 12V mini battery(included)
Power of the receiver(AC): 2 * 1.5V AAA Alkaline Battery(not included)
Outdoor working distance: max. 30m / 90feet (open area, no fraise)
Indoor operating distance: max. 25m / 75feet
Channel: 4 channels
Frequency: 433Mhz
Synchronous speed: Max. 1/250sec
Color: black
Material: metal + plastic
Package size: approx. 10 * 8.5 * 5cm / 3.9 * 3.4 * 2.0in
Package weight: 113g / 4.0oz

Package Lists:
1 * 4-channel Transmitter
2 * 4-channel Receivers
1 * PC Sync Cord(2.5mm to PC)
1 * User Manual(English)

Note:
This item only includes the trigger set and sync cord.








1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

2) Payment must be made within 3 days of order.

3) If you can't checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.


1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4.  We will bear all the shipping cost if the product(s) is (are) not as advertised.

1. 12 months Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on aliexpress!

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!


Godox X2T-C X2T-N X2T-S X2T-F X2T-O X2T-P TTL 1/8000s HSS Wireless Flash Trigger Transmitter for Canon Nikon Sony Fuji Olympus

Godox X2T-C X2T-N X2T-S X2T-F X2T-O X2T-P TTL 1/8000s HSS Wireless Flash Trigger Transmitter for Canon Nikon Sony Fuji Olympus

Product description
Godox X2 Series TTL wireless flash trigger can work with Godox camera flashes, outdoor flashes and studio flashes with built-in Godox X wireless radio system. X2 achieves stable, reliable and effective real-time signal transmission which makes it a good choice for photographers who have various lighting demands.
Specifications:
Model: X2T-C
Competible Cameras:Canon EOS camera(E-TTL II autoflash) , work with cameras with PC sync socket
Competible mobile phone:
iphone 6S,iphone 6s Plus, iphone 7 Plus, iphone 7, iphone 8 Plus, iphone 8,iphone 6,iphone 6 Plus,iphone X;
Huawei P9,P10,P10 plus,P20,P20 pro,Mate 9pro,Mate 9,Mate 10pro,Mate 10,
Samsung: galaxy S8,galaxy Note8,galaxy S9
This table only lists the tested Smartphone models, not all Smartphone. For the compatibility of other Smartphone models, a self-test is recommended.

Power supply:AA battery*2
Flash exposure control
TTL Autoflash: E-TTL II
Manual model: yes
Multiflash mode:yes
Functions:
High-speed sync:yes
Rear-curtain sync:yes
Flash exposure compesation:yes,±stops in 1/3 stop increments
Flash exposure lock:yes
Focus assist:yes
Modeling lamp:yes
Beeper: yes
Wireless shutter: the receiver can control the camera shooting via 3.5mm sync cord jack
Zoom setting : Adjust the focal length of the flash through the transmitter TCM function: Converting the shooting parameter under the TTL mode to a value under the Manual mode
Firmware upgrade:support program firmware upgrade via Type C usb cable Memory function : As long as 2 seconds after setting parameters, the parameters will be remembered , and the original data will be recovered once restart.
Wireless flash:
Transmission rage(approx.)0-100m
Built-in wireless system: 2.4G

Package Listing:

1* X2T Transmitter



Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + 2x Receiver Set for Canon Nikon Pentax Studio Speedlite Flash

Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + 2x Receiver Set for Canon Nikon Pentax Studio Speedlite Flash

Godox CT-16 16 Channels Wireless Radio Flash Trigger Transmitter + 2x Receiver Set for Canon Nikon Pentax Studio Flash
 
Introduction:
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.
The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signal. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times. The trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.
Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/250sec.
All the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.
Features
- Universal hot shoe interface
- 433MHz transmit frequency secures fast response and stable transmission
- 16 channels, transmitting distance up to 30m, no limits with directions or angles
- Maximum synchronous speed up to 1/250 second
- With studio flash interface, can wirelessly trigger several kinds of studio flashes
- Speedy frequency regulation, convenient for photographers to shoot
- Energy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver
- Comes with a PC sync cord for cameras without hot shoe connections
Note: This trigger does not support TTL function.
Compatible with:
For Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
For Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
For Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
For Olympus FL-50, FL36;
For Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
For Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
For Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
Other flash models with a trigger voltage of 12V or lower;
Work with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for SONY as they use a special hot shoe)


Specification

Model: CT-16
Channel: 16 Channels
Transmit Frequency: 433MHz
Transmitter Power: 12V 23A lithium battery (Not included)
Receiver Power: 2 x 1.5V AAA Battery (Not included)
Outdoor operation distance: max. 30m / 90feet (open area, no fraise)
Indoor operation distance: max. 25m / 75feet
Synchronous speed: Max. 1/250sec
Transmitter Dimension: 60x42x30mm
Receiver Dimension: 90x50x32mm
Color: Black
Material: Metal + Plastic
Operation
How to use:
Insert the transmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both transmitter and receiver at same channel. Press the Test button on the transmitter to test before shooting.
If your camera does not have hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (Only the old camera needed).
You can trigger both the flashgun and studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC slave flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord(not included).
Incompatible: Canon 2000D, Sony Minolta hot shoe,etc.
 
Package Listing CT-16
1 xCT-16 Transmitter
1 x CT-16 Receiver
1 x Sync Cable
1 x Convert Adapter
1 x User Manual
 
Package Listing 1xT add 2x R
1 x CT-16 Transmitter
2 x CT-16 Receiver
2 x Sync Cable
2 x Convert Adapter
1 x User Manual
 
Package Listing 1xT add 3x R
1 xCT-16 Transmitter
3 x CT-16 Receiver
3 x Sync Cable
3 x Convert Adapter
1 x User Manual
 
Package Listing 1xT add 4x R
1 x CT-16 Transmitter
4 x CT-16 Receiver
4 x Sync Cable
4 x Convert Adapter
1 x User Manual
 
Note: Don't include other products
 
 


  • bell sleeve jumper
  • food processor for meat
  • 15 inch light bar
  • emerald green strapless dress
  • floral swaddle blanket
  • blonde ponytail lace front wig
  • mens novelty winter hats
  • thick copper bracelet
  • eyeshadow brushes for beginners
  • party fans diy
  • metal initials
  • mermaid wedding dress with tulle bottom